Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost a key to their vehicle may be concerned about the cost and inconvenience of purchasing another one. There is a solution to avoid the expense of making your own key fob.
You'll require a flathead screwdriver to accomplish this. Put the flathead screwdriver into the slot located at the middle of the case, and then slowly open it.
Cost
Most SAABs have two keys when they're new, but some used cars only have one. In this scenario, the owner will have to purchase the new key. This can be expensive. Fortunately, there are many ways to save money on this procedure. For replacement saab key , if you just require a replacement key fob case and you want to save money by buying an older case from an auto dealer. These cases do not include the emergency badge or key, and tend to wear out quickly.
You must also be able to pay for the installation and programming the TWICE module. These costs can add up quickly, especially if you don't have a spare.
This is why it is essential to have at least two keys for your car. In this way, if you lose your only working key, you won't be stuck without transportation.
It's not as hard as it appears to add a second Saab 9-3 key. The only problem is that you'll need to pair the key with the car's computer. This can be accomplished by an auto dealer, however it can take some time to set up an appointment. You can find all the details you require on the internet to guide you through the process.
Installation
Most Saab vehicles built after 1995 have an immobilizer system that uses a key-fob to control the engine of the car. This system also controls remote and door locks for the car. It is vital to keep a spare key on hand to keep from losing the original and having your car stolen. The good news is that in the event you lose your only functioning Saab key you can get it replaced without the need to pay for an expensive dealer service.
You must first prepare the new keyfob. To do this, use an open-ended screwdriver to remove the case. Simply place the screwdriver in a small slot in the middle of the case and gently work it. If you're having trouble, try using different angles. After you've opened the case, you're able to take out the electronics and place them in a new fob case.
Once you have the replacement fob and the key, you are able to begin the process of programming. You'll have to connect your Tech2 and follow these instructions for the NG 9-3 (with or without keys). It is recommended that you make use of a replacement TWICE unit that is already connected to the correct key by using an transponder. You can locate this unit on the internet. However, it is important to be sure that it's an OEM replacement.
Programming
In general, adding an additional key for a Saab 9-3 requires an additional tool called a Tech 2. This requires programming the vehicle to recognize the new keys. This is a more complex procedure than simply copying a key made of metal. It must be carried out by professionals to avoid damaging the electronic system of the vehicle. It is best to get an extra car key as soon as you can. If you delay it could cost you a lot more in future.
You'll also have to replace either the CIM or TWICE modules. It's a postal process and not something you can get through an aftermarket retailer. Based on the car model the price could be quite expensive.
There's an alternative to the dealer who will charge you top price to replace your car computer. S.A. Locksmith & Security will re-program your Saab computer to prepare it for the new key. This will help you save the expense of purchasing a brand new car computer. This service is quick, affordable and easy. You can save up to 50% of what the dealer would charge. This is a great solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is among the most original cars to sport the Saab badge. It was an Scandinavian front-drive fighter jet based monster that was quick and fun to drive. While a variety of other Saab models came after it, very few were as distinctive.
If you own a Saab 9-3 and lose the key fob, you need to replace it as fast as you can. Saab vehicles come with an immobilizer device that requires a special key in order to start. The process of replacing the key is simple if you have an extra key, but it could be expensive and time-consuming if you don't have an additional key.
You can save money when you purchase an used key fob replacement and have it programmed locally by locksmiths. However, you must be cautious when purchasing used keys on eBay as well as other online marketplaces. They might not be authentic and you may pay more at the end.
Anyone can remove the electronic components and battery of an old key fob by using a small flathead phillips screwdriver. Be cautious not to damage the small electronic components within the case. Avoid pouring liquids inside the case because this could cause damage. Also, avoid buying cloned keys through aftermarket sellers, since they may not have been connected to the CIM on your car.